Product Specifications
www.shuttle.eu
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
Pa
e 5 10 Se
tember 2013
©2013 Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purpose only.
SD Card Reader
The built-in SD card reader at the front side makes it easy to transfer
files from your camera so you can share videos and photos on your
DS47 with ease. It supports SD, SDHC and SDXC memory flash cards in
standard size format also supports boot up from bootable SD cards.
13
24
Gnd Pwr
CMOS +5V
External power button by separate remote line
If because of space constraints (e.g. in the case of a fixed installation)
the machine cannot be switched on by pressing the front power
button, it can be powered on by a separate remote line. You will find
an appropriate four-pin-connector at the back panel of DS47 (pitch
2.54 mm). In addition, this connector also provides the Clear CMOS
function and an external 5VDC voltage supply.
Pin 1-3 Connect external power button (use a temporary switch)
Pin 3-4 Close these pins for 3 seconds to perform a Clear CMOS
Pin 2-3 External +5V DC voltage (Pin 3 = Ground).
Kensington Lock
This is a small, metal-reinforced hole as part of an anti-theft system.
DS47 provides an appropriate hole on both side of its chassis. The lock-
and-cable is not included.
40°C
24/7 nonstop operation and 0~40°C temperature range
Shuttle DS47 is officially approved for 24/7 permanent operation.
Thanks to its low power consumption and completely passive cooling,
this PC runs highly reliable making it perfectly suitable for digital
signage and POI/POS applications – even at ambient temperatures up
to 40 ° C. [5]
Conditions for permanent use:
- Free circulation of air amongst the PC must be guaranteed
- Ventilation holes must stay clear
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer (max. one hard disk)
- for ambient temperature >35°C we strongly recommend to use SSDs
(instead HDD) and rugged memory with wide temperature range [5].
Operating Position
The passive cooling system of DS47 uses the convective heat-transfer
principle, which requires observing the correct operation position of
the device. Please follow these instructions in order to obtain the best
possible cooling effect:
1) Device must only be used in vertical position with the DVI port facing
up
2) Please make sure to use either the supplied feet or the VESA mount
(8 stránky)
(12 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce